Indoor wall waterfall – of course, this fun is not cheap, but in the evenings you will enjoy the running stream of water and it worth it.
In the manufacture of the indoor glass waterfall wall by your hands there is no big deal. Pursuant to the principle of operation the device for the house is not much different from the cascade in a cottage. In both cases, the fall is composed of the following components: special pump – filtration systems – pipeline – water tank – surfaces of waterfall. Moreover, all the supplementary components used such systems as decorative lighting, special collectors for distribution the water flows.
Diy indoor waterfall wall:
- The pump – is a key element of the entire system. The capacity of the pump is opted based on the height to which water must be raised, the length of the pipe line (the distance from the water intake site and to place the spout) and the amount of aqua should be circulated in the chain. It issignificantly to choose the right pump capacity. Manufacturers of low-priced units in the characteristics indicate the maximum amount that the pump can process per unit time. But this value is usually too high, so you can minus about 10-15% from it;
- The second important point is that this is the number of gallons that the pump can process under optimal conditions (rise in low height, with optimal diameter of the pipeline). The conclusion from the above – choose equipment for cascade with a margin. You should also pay attention to the noise. This characteristic is immensely important if you are doing a cascade for your home or apartment;
- The next step is the setting of the pipeline. As aqua flows over any surface, we need to take care of it the right proportion.
Indoor wall waterfall fountain – for those you have a breathtaking view of flowing pond. Today you can easily select and order this device of any shape and size. It may be an unusual waterfall with backlight, with different variations of the flow of water or a small decorative water glasscascade.
